How to Stick the Green Pad in the Heater Band

Introduction: How to Stick the Green Pad in the Heater Band

This is a tutorial to stick the green pad in the heater band.

Step 1: Materials

The materials are:

  • Masking tape.
  • DK3.
  • Clamps.
  • Green pad.
  • High temp rtv silicone.

Step 2: Add

Now we add some silicone in the green pad.

Step 3: Place

We proceed to put the green pad in the heater band carefully.

*Note: dont forget to put the temp sensor.*

Step 4: Fix

Finally we take the clamps to fix the green pad.

Share

    Recommendations

    • Water Contest

      Water Contest
    • Metalworking Contest

      Metalworking Contest
    • Fix It! Contest

      Fix It! Contest

    Discussions