How to Tie an Overhand Loop

Introduction: How to Tie an Overhand Loop

About: The ultimate knot tying tutorial channel. Anything from basic stopper knots, to more complicated loops.

Welcome to my How to Knot tutorial, I will be showing you how to tie an overhand loop. This knot is typically used for camping or just as a general purpose. This is quite a useful knot and is even great as a stopper. This is a simple knot when a fixed loop is needed, can be tied anywhere along a piece of rope so it doesn’t need a working end and can be used for attaching hardware such as clips or hooks. Unfortunately this knot is known to jam, making it difficult to untie.

Be sure to check out the descriptive video at the end to help for further understand.

Step 1:

First double a section of rope to form a bight.

Create a loop.

Pass the free end through the loop and tighten.

Step 2: Watch Video

I hope you enjoyed my tutorial, please leave a comment below and give my video a thumbs up. If you would like to see more knot tying tutorial, feel free to follow my profile and subscribe to my YouTube channel.

Be the First to Share

    Recommendations

    • Lighting Challenge

      Lighting Challenge
    • Make It Fly Speed Challenge

      Make It Fly Speed Challenge
    • Metalworking Contest

      Metalworking Contest

    Discussions