How to Make OR REPLACE a RC Car Antenna

Introduction: How to Make OR REPLACE a RC Car Antenna

My rc car antenna broke so i decided to make a new and better one.

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Materials Needed

You will need:
1: Phone cord
2:Wire strippers
3:a bamboo skewer

Step 2:

1.cut the 2 phone cord ends off.
2.Strip 1 end of the wire and twist the ends
3.connect to where your previous antenna existed by twisting them together.
now you're all done and will have double your previous range. enjoy

Be the First to Share

    Recommendations

    • Trash to Treasure Contest

      Trash to Treasure Contest
    • Raspberry Pi Contest 2020

      Raspberry Pi Contest 2020
    • Wearables Contest

      Wearables Contest

    7 Discussions

    0
    admin
    admin

    10 years ago

    Hello, and welcome to the Instructables community! It's great that you've decided to tell the world about something you've made by publishing an Instructable. We just wanted to let you know that your project still needs a little more work if you want it to be well received on Instructables. Projects that don't include certain basic elements tend not to get the attention that they deserve, and so we'd love for you to check out the list below of what makes a successful Instructable. Successful projects on Instructables include: - clearly written details of a finished project with instruction - as many steps as are necessary to explain your project - clear images that you took of your project for most, if not all of your steps - an intro image - proper spelling and grammar - appropriate cautions or safety considerations I'll give you another opportunity to make any final changes to your project before we publish it. Once you're all set to go, please republish your project and send me a quick comment letting me know that you've made some changes. I'll give it a quick final check to make sure you're on the right path, and then remove this note. Thanks for your submission and we hope to see your project published soon!

    0
    21arcisd
    21arcisd

    Question 10 months ago on Introduction

    what about the bamboo skewers? you said they were needed, but not what for.

    0
    afloyd4
    afloyd4

    3 years ago

    My son pulled out the antenna on his car controller. Where do I reattach it?

    image.jpg
    0
    ScottK131
    ScottK131

    Reply 3 years ago

    Look for a solder spot near the top of the controller marked ANT.

    0
    shashankp20
    shashankp20

    3 years ago

    what does it mean by 'strip ONE end of the wire and twist the ENDS ' ?

    0
    Patented
    Patented

    10 years ago on Introduction

    I think your phone wire needs to be the exact same length as the previous one or it won't work properly, no?