hi guys,this is origami sword..would like fighting war with Sword?let's fight!whoo..yea..yawo!Okay..Let's build Sword.
Step 1: Step 1
Material for building Sword-
•Craft Origami Paper
Step 1]Start by cutting a regular size 6 inch x 6 inch (15cm x 15cm) square origami paper into two. We'll be using both halves of the paper as this origami consists of 2 colour paper.
Step 2: Step 2
With one half of the paper, fold it in two on the horizontal axis. Crease well and unfold.
Step 3: Step 3
Fold the right side approximately 3cm to the left.
Step 4: Step 4
Flip paper over. Fold both the top and bottom halves to the center.
Step 5: Step 5
•Make 2 diagonal folds on the right side.
•Fold paper in half.
Step 6: Step 6
Start with the other half of the paper. Fold paper in half on both the horizontal and vertical axis. Crease well and unfold.
Step 7: Step 7
•Fold both the top and bottom halves to the center.(picture 1 & 2)
•Fold the bottom half over to the top.(picture 3 & 4)
Step 8: Step 8
Fold the left side to the center crease.
Step 9: Step 9
Now we're going to fold the right side over to the left or right and tuck it in between the layers on the left or right side.
Step 10: Step 10
•Make 2 diagonal folds as shown. Crease well and unfold.
Step 11: Step 11
•We're now going to pry open the paper and bring the upper layer over to the left.
•Press paper flat to form a triangle at the top and bottom.
•Make 2 small valley folds upper and downward
Step 12: Step 12
•Time to combine the 2 parts! Insert the first part (blade) through the middle of the 2nd part.
•Get the sleotape & Stick 2nd part which is insert upper & downard in middle.
Step 13: Done
we have completed Origami Sword..
if u got problem,comment down.