How to Make a 3D Printed Sailboat Toy



Introduction: How to Make a 3D Printed Sailboat Toy

In this instructable I will show you how to make your own 3D printed sailboat.
For this you'll need a 3D printer with filament and software for it.

ATTENTION: You will need supports to print this!!!

Disclaimer: I made this model, but I haven't printer it, it might not work!

This project is on , and if you want you can modify it as you wish.

So, lets get started.

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1:

First download the file(s) below (One of the files contains all the parts), then, If you have a Makerbot load them into ether ReplicatorG or MakerWare, If you have some other printer open its software and load the files. Resize the parts if you want and then print them.

After the print has finished remove the supports from the print, assemble the parts, add a sail and your 3D printed sailboat is finished.

Toy Contest

Participated in the
Toy Contest

3D Printing Contest

Participated in the
3D Printing Contest

Be the First to Share


    • Trash to Treasure Contest

      Trash to Treasure Contest
    • Rope & String Speed Challenge

      Rope & String Speed Challenge
    • Wearables Contest

      Wearables Contest