Introduction: How to Make a Paper Battle Crasher
Hello people! Today I will show you how to make a Paper Battle Crasher.
Please don't be harsh as this is my first instructable, so if you have any suggestions please post as I would like to improve...Thanks
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Materials
Well pretty much just paper......LOL
Step 2: Step 1 of Folding
Get a piece of paper (printer paper is fine) and fold it in half
Step 3: Step 2 of Folding
On one end, fold the edge diagonally so that it lines up with the border and unfold.
Step 4: Step 3 of Folding
Repeat step two on the other side
Step 5: Step 4 of Folding
Turn the paper over and fold the paper so that it touches the border of the diagonal creases.
Step 6: Step 6 of Folding
Repeat steps 2-5 on other side (UGH)
Step 7: Step 7 of Folding
Fold the two flaps sticking up so it matches up with the half-way point.
EDIT: If you guys are familiar with origami, then this project uses two water bomb base folds on each ends
Lift the two separate flaps to one side and fold to the half-way point and repeat on the other side
Step 9: Step 9 of Folding
fold the figure in half and tuck the points in the slits and fold the end up for flicking and DONE....
Step 10: For Those Who Do Not Know How to Use This
It is simply flicked on a surface and if two were made, they can battle ( much like crashing cars head-on) And here is a photo of the finished product l ( down at the photos!)