How to Make a Dual Pinball Machine of K'nex

Introduction: How to Make a Dual Pinball Machine of K'nex

Hello,
and welcome to my first instructable!
today, we are going to make dual pinball machine of K'nex!

Let's start!

oh jeah, it is my first, so don't be to harsh

Step 1: The Base

at first, you need a strong base.
if the picture isn't clear enough, i will upload pictures

Step 2: The Pinball Machine

you need to make the following steps 2X
the machine is 11x11
if you dont't understand something, just ask!

Step 3: The Flippers

here I will explaine how to make the flippers

Step 4: The Walls

this step is simple

Step 5: Bumpers

this is also simple!

Step 6: Now the Real Work

this is how to put the to pinball machines together
watch carefully!

Step 7: Done!

if you still want to ask something, just ask!

Be the First to Share

    Recommendations

    • Exercise Speed Challenge

      Exercise Speed Challenge
    • Pocket-Sized Speed Challenge

      Pocket-Sized Speed Challenge
    • Audio Challenge 2020

      Audio Challenge 2020

    6 Discussions

    0
    ProtectTheAlphaWolf
    ProtectTheAlphaWolf

    4 years ago

    Hey! I love the idea,but I don't have that many pieces ?so if you could make a it a little bit smaller this time and with only one side this time please as I said earlier I don't have that many pieces you can see how many pieces I only have an 28 Qt. box full to the brim ? so please make one of those for me ?

    0
    ProtectTheAlphaWolf
    ProtectTheAlphaWolf

    4 years ago

    that looks like a great idea! but it takes a lot of pieces

    0
    shadowninja31

    You need more pics for it to be an instructable, this is more of a slideshow with steps. But, I think you should change it, so they are going against each other. Where the balls can go over the hill to the other "board" so that it's one on one.