Introduction: How to Make a Loud Straw Voovoozala. :2)

First I want two say that I DO NOT ACCEPT ANY RESPONSIBILITY FOR DAMAGE OR INJURY .
(also sorry for any spelling mistakes or punctuation as I am only 13 years old)

This instructable will tell you how to make a cool and loud voovoozala( I don't know how to spell it but you get the picture).

All you will need:
-a straw.
-some teeth.
-the ability to blow hard.

Step 1: Make the End.

-Step 1

Now that you have your straw you need to make the bit that you blow through and it makes the noise. to do this you need to bite the end so that when you leave it the top of the straw and the bottom are nearly touching. If this isn't right the straw wont make any noise 

Step 2: BLOW!!!

-Step 2.

To make the noise you need to blow really hard. What you don't want to do is let your cheeks puff out, you want to keep then in nearly touching your teeth. If your straw wont make a noise then go back to step one and try to adjust it until it works.

Step 3: Tuning

-Step 3

You can make your straw produce high or low sounds by making the tube of the straw long(for low sounds) or short(for a high pitch sound)

Step 4: Mod!!!

-Step 4

You can modify your straw by cutting the end after you have followed steps 1, 2 and 3 into a point. This makes it sound really annoying!!!

Please comment and rate on what you have done!!!

Step 5:

3rd Epilog Challenge

Participated in the
3rd Epilog Challenge