Introduction: How to Make a Mini Knex Gun
This instructable shows how to make a mini knex gun with 12 parts in total!
P.S. This is my first instructable so don't say bad things about it.
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Gather Parts
To make this you need:
-2 Blue rods
-2 Green rods
-2 Orange connectors
-2 Gray connectors
-3 White connectors
-1 Small rubber band
Step 2: Make the Barrel
For this step you take a blue rod, 3 white connectors, 2 gray connectors, and an orange connector and you assemble it like so.
Step 3: Make the Firing Mecanism and Handle
Take the other blue rod and place it on the other orange connector like so.
the handle is the two little green connectors and they go on the bottom of the gun.
Step 4: Insert Firing Mecanism and Rubber Band
Insert the firing mecanism in the the back of the gun and place the rubber band on the orange connector and on the blue rod on the gun itself.
Step 5: And Done!!
You made a mini knex gun!!