How to Make a Simple Air Guns

1,387

10

1

today I'm going to make a simple air gun that anyone can make

Supplies:

Step 1: The Mount

I just threw together a bunch of scrap wood I had laying around

Step 2: Valve

    this is a 1 inch threaded to snap in ball valves with 1 inch PVC, then 1 inch to half inch connector

    with half inch PVC connected

    Step 3: Barrel Attachments

    half inch to 1 inch threaded

    Step 4: Barrel

    1 inch to1 inch threaded male and I use this attachment for paintballs

    Step 5: Air Compression Tank

    drill hole in center hard part of bottle, get a tire valve, and pull it through the hole

    Step 6: Putting It All Together

    screw bottle into a ball valve with a generous amount of Teflon tape then all you have to do is pump up the bottle with a bike pump and pull the valves

    Share

    Recommendations

    • Colors of the Rainbow Contest

      Colors of the Rainbow Contest
    • Arduino Contest 2019

      Arduino Contest 2019
    • Fandom Contest

      Fandom Contest

    Discussions