How to Make Keypad

Introduction: How to Make Keypad

In this project you can see how to make keypad .

you need :

button

pcb board

some wire

.In this project you can see how to make keypad and to control with arduino (to make password, control servo with password etc) using simple button

3. some wire Its simple project juct you need to connect button. to see how to connect button see the photo . 1.connect pin 1 of button 1 to pin1 of buton 3 . (one pin on keypad). 2.connect pin 1 of button 2 to pin 1 of button 4. (two pin on keypad). 3.connect pin 2 of button 1 to pin 1 of button 3. (three pin on keypad).

4.connect pin 2 of button 2 to pin 2 of button 4. (two pin on keypad).

for all project go to http://best-circuit.blogspot.com/

Step 1:

Be the First to Share

    Recommendations

    • Pocket-Sized Speed Challenge

      Pocket-Sized Speed Challenge
    • Audio Challenge 2020

      Audio Challenge 2020
    • Maps Challenge

      Maps Challenge

    3 Discussions

    0
    CornJ
    CornJ

    4 years ago

    Don't click www.arduinoo.tk !!!!
    It leads to a bogus, lottery page. This whole instructable should be reported.

    0
    Electronice
    Electronice

    Reply 4 years ago

    sorry but my page is block

    0
    CornJ
    CornJ

    Reply 3 years ago

    Ah, ok. It seems to work again, cool.