Introduction: IPod Stand
Step 1: Gather Supplies
You will need:
•Two 16 x 16 platforms (You can substitute these two platforms for bigger or smaller platforms too)
•Two 12 x 4 flat pieces (I found that these pieces easily held up the weight of my iPod with the case)
•I couldn't find another one of these. You can use just one or you can use a smaller one like I did.
Step 2: Platforms
Take one platform and lay it flat in front of you on a hard surface, like shown in the picture.
Step 3: Platforms
Take the other platform and turn it so the studs are facing you, like shown.
Step 4: Platforms
Hook the platform with the studs facing you onto the platform on the flat surface. Make sure the studs on the platform on the flat surface are NOT lined up with the studs on the platform standing up. (Shown in picture)
Step 5: Flat Pieces
Take one flat piece and hook it to the platform on the flat surface.
Step 6: Do This Again
Do this same thing on the other side of the platform as shown.
Step 7: Finished!
Your stand is finished! I use this for recording my youtube videos. I hope it is as helpful to me as it is to me.