Everyone who used the wheelbarrow knew that heavy loads was a hard work.
Here is a very easy way to make things easier.
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
1.1. Profile 20 x 40 mm, length 500 mm - the rest of the casing housing sofa
1.2.The rear wheels of the discarded childrens wheel
1.2.PVC profile cover
2.1. Remove the rear wheels from the chassis
2.2.Profile 20 x 40 mm, cut with an angle cutter on the length 500 mm
2.3. Grinding sharp edges
2.4.Firstly, the profile is welded to the wheelbarrow
2.5. Wear the wheel holder for the profile
2.6. Welded parts grinding
2.7. We add color all the added parts
2.8. Close the profile with PVC covers
I tested the wheelbarrow fully loaded.
The delivery of fertilizer was very light.
And the little garden is tidy.