Infrared Wireless Temperature Transmission Alarm System With Arduino

500

1

About: www.ICStation.com is a top store of electronic, which specializes in all kinds of IC products, such IC accessories, Module, Robots, Development Board, Transistor, Capacitor and so on. We're located in She...

ICStation team introduce you the Infrared Wireless Temperature Transmission Alarm System based on the ICStation UNO R3 Board. This system works under 5V power supply, it can monitor the temperature change in real time and send the change date to the corresponding control room. When the temperature is beyond the scope we set before, the system will alarm and inform us to take action. What’s more, this system is suitable for the temperature monitoring of the substation and switch cabinet. It has a good application prospect.

Function:

When the system works, the ICStation UNO R3 uses the DS18B20 Temperature Sensor to detect the current environment temperature and uses the infrared module to send the date to the corresponding device. When the temperature is beyond the temperature scope we set before, the system will alarm to inform us to take action.

Code for reference:

http://www.icstation.com/newsletter/eMarketing/Temperature_Alarm_Code.zip

Supplies:

Step 1: Components List:

Step 2: Schematic Diagram of the Sending Part.

Step 3: Schematic Diagram of the Receiving Part.

Step 4: Connection of the LCD1602.

Step 5: The Hardware Connection of the Sending Part.

Step 6: The Hardware Connection of the Receiving Part.

Step 7: Picture to Show Effect.

Step 8: Video to Show Effect.

Share

    Recommendations

    • Fandom Contest

      Fandom Contest
    • Classroom Science Contest

      Classroom Science Contest
    • Gardening Contest

      Gardening Contest

    Discussions