Introduction: IoT Base Platform With Arm MBED, WIZwiki-W7500 : EchoServer

By opensrclab.tistory.com/category
About: S/W Engineer for Open Source Platform.

I know arm MBED platform for IoT. Recently WIZwiki-W7500 board is announced by WIZnet. So I implemented a firmware of WIZwiki-W7500 board by Ethernet SW modification because I can handle a source code easily. You can understand how to use arm MBED platform. Please refer to the following step.

Step 1: Prepare Materials, Hardware Connection

Please refer to the link below.

https://www.instructables.com/id/IoT-Base-Platform-With-GCC-WIZwiki-W7500/

http://opensrclab.tistory.com/50

Step 2: Prepare Development Environment

Do you know arm MBED platform?

https://developer.mbed.org/handbook/Homepage

Step 3: Software : EchoServer

EchoServer Example

https://developer.mbed.org/teams/WIZnet/code/TCPEchoServer-WIZwiki-W7500/?platform=WIZwiki-W7500

Step 4: How to Run : Preparation

Refer to the arm MBED link. https://www.mbed.com/en/

To create your account. https://developer.mbed.org/

To open cloud development environment.

Import Programs or Libraries.

Import mbed_blinky project.

Modify LED pins.

Attachments

Step 5: How to Run : Result

Import TCPEchoServer-WIZwiki-W7500 project.

https://developer.mbed.org/teams/WIZnet/code/TCPEchoServer-WIZwiki-W7500/?platform=WIZwiki-W7500

Modify MAC address.

Monitor Debugging COM Port.