A Stand for Tony's Work

4,964

80

4

Introduction: A Stand for Tony's Work

Iron Man FacePlate and Arc Reactor Framed with light.

Step 1: Iron Man: Arc Reactor + Face Plate + Led Frame Stand

hi! continuing with my Iron Man project  see here, the next step is of course : constructing an Arc Reactor.
I've seen many in many websites, in Instructables there are a lot of great projects well documented. So I wanted mine and wanted it ... personal (non identical to others)...even if I'm of course inspired by all the projects I've seen here (and there)...

THE ARC REACTOR:

I always saved junk parts from old pc's, hard drives and other electronics.

here the construction of the arc needed:
- a VCR motor
- 8 HDD motor contactors
- 8 golden stripes (connecting the hard drive reading head)
- a clear acrylic ring (laser cut)

the all was assembled with hot or rapid glue.

THE FACE PLATE:

see here:  https://www.instructables.com/id/Iron-Man-Gauntlet-Desk-Lamp/

THE FRAME:

using a wooden frame (peinted in black)
+ a mouvement detecting led lamp.

VOILA!!!

Share

    Recommendations

    • Water Contest

      Water Contest
    • Creative Misuse Contest

      Creative Misuse Contest
    • Fix It! Contest

      Fix It! Contest

    4 Discussions

    0
    None
    nemo13

    4 years ago

    well I thought my detailed pictures and the listing of the components used would be sufficient.... ;)

    hey @nemo13 will there be an upcoming instructable for this build ?

    holy mother of my fat but!

    thats awesome.am an iron-man fan too