Introduction: KEYHOLDER/ JEWELLERY TREE
The Keyholder Jewellery Tree makes storage of keys, Jewellery or other fine stuff easier. It’s also a decoration piece.
Step 1: The Materials You’ll Need
- Wooden beam
- 1 Round stick Ø8 x 30cm
- Dremel 3D PLA for the 3d printed parts, in your favorite color.
Step 2: The Tools You’ll Need to Work
- Saw (Hand or electric)
- Drill bit Ø8
- Wood glue
Step 3: Base Slab
Saw a fine paste from the wooden beam, about a thickness of 2cm
Step 4: Drill a Hole
Drill a hole in the middle of the wooden beam
Step 5: Paste
Paste the stick Ø 8 in the hole of the wooden beam
Step 6: Assemble the 3d Printed Pieces
Assemble all the 3d printed pieces, and cut the wooden stick on the right length
Step 7: Keys, Jewellery, ...
Hang the keys, jewellery, ... in the tree