Introduction: KM Graziella
In this project we KM Garage we took care of the restoration of a bike Graziella.
We started with a scrap to get a little gem on two wheels. I hope that the project will like. If you like to go visit my Facebook page and put a like :)
Step 1: Get an Old Bike
Step 2: Create a Project
Step 3: Disassemble
Step 4: Sanding
Step 5: Paint
To prepare the frame for painting we must first clean it with a damp cloth and then dry it with a dry cloth. it is important to do this so that the color will stick well to the frame. It starts with a bottom layer of neutral paint that serves to avoid causing rusting of the new frame. Then you begin to give some hands color (in my case 3) and then in the end a layer of paint Protector. For this project I used the simple spray cans.