K'NEX Man/jet Transformer




as i was looking at all the knex transformers on it looked like they don't move that well so heres my idea of knex plane transformer its 9 easy steps how to do it here we go

Step 1: Step 1

its a knex man. build this

Step 2: Step 2

its three totol for both arms. you need them for later 

Step 3: Step 3

this is the legs build them. than add the green knex with 2 blacks on the ends.

Step 4: Step 4

the head. I used the top head and lower jaw of the knex man

Step 5: Step 5

by this step you should have cool looking knex man

Step 6: Step 6

this is the wings of the jet. when you get them together you put the grays together at the end you get this 

Step 7: Step 7

putting the wings on. they go the on the arms as you can see

Step 8: Step 8

to make the arms move real good i snaped apart the green peices on both arms then i move the other greens to the head

Step 9: Step 9

transforming it you streach out the arms to make the wings and pull the nose of the plane up above the knex mans head
then fold his legs back then fold them down to make the back fin of the jet

Step 10: The Transformer



    • Trash to Treasure

      Trash to Treasure
    • Weaving Challenge

      Weaving Challenge
    • Paper Contest

      Paper Contest

    7 Discussions


    Wow! I have 3 knex bodies I found in a garage sale-I didn't know they were so old!

    14, 8:25 PM.jpg

    7 years ago on Introduction

    Great, but the pictures could be in an somewhat more lighting condition, sometimes it's hard too see.


    Reply 7 years ago on Introduction

    you can always go to www.knexusergroup.com and order them there you can always order new cheap parts !!!! that's what I always do


    Reply 7 years ago on Introduction

    well i ask knex poeple themselfs and the stoped makeing them 1989 so you have on cregs list or ebay i got most fo mine on ebay under knex man or knex robot but mostly under knex man theres a few on there right now for 2 for $10.00 and free shipping