KNex Sniper Thingamabob V2

1,321

3

12

Published

Introduction: KNex Sniper Thingamabob V2

About: I have a clones! Clone1: https://www.instructables.com/member/knexgunner7073/ Clone2: https://www.instructables.com/member/knexgunner1234/ Clone3: https://www.instructables.com/member/knexgunner16/ Cl...

THis is My Second version of my original sniper (https://www.instructables.com/id/Knex-Sniper-Thingamabob/) It now Features:
A true Tigger
BEtter Stock
Better Barrel
Forestock (adjustable)

Stats:
Range: I got 38 Ft at a ~ 15 Degree angle
Length: 2ft (Full Version) 1' 8" (Compact)
Height: 4in
Weight: ~100-200Grams
Accruacy: 2 sq. In. from target ( if you look directley down the sights)

Step 1: The Stock

THis The STock (You KNow, The Butt?)
Pic1: Make this
PIc2: Make this
Pic3: Make This
Pic4: Another Veiw
PIc5: Connect
Pic6: Connect (finished Product)

Step 2: Hanlde+Trigger

This is the part that you hold on to remembered? Im sorry if you cant make this from two pictures.

Step 3: Main Barrel

This Is where the trigger will be inserted and the pin wil go
The Firing Pin is a purple 3-D connecter connected to a black rod with tape.
P.S I dont like to take sections apart like this so i think you can make it from the pics provided.

Step 4: Attatch Ment Barrel

This is the barrel to make the full verision you do not need it if you want the compact version only.
pic1&2: Make
Pi2: Make (wierd peice)

Step 5: Forestock

THis is the forestock for the full verison

Step 6: Assembly

Time to assemble the gun
PIc1:attach stock to handle
pic2:attyack barrel to handle
pic3: attach extened barrel to main barrel
pic4: add Wierd peice
pic5: Add forestock

Step 7: Rubberbands

Trigger bands: See Last step
Firingbands: PLAce where ever you wish

Share

    Recommendations

    • Clocks Contest

      Clocks Contest
    • Game Life Contest

      Game Life Contest
    • BBQ Showdown Challenge

      BBQ Showdown Challenge

    12 Discussions

    if u dont have the panel pieces (which i dont) then use rods instead to diagonally join pieces toghether.

    the bit at the front is called the foregrip but apart from that great instructable
    it would look awsome if there was a long barrel and maybe a mag

    pull hte pin back (purple connector on grey rod) put a bullet dont the barrel (any size rod). and pull the trigger

    great ible and pics =]
    btw it's foregrip not forestock =]

    Looks rather simple, But great instructable and pictures!!