KORG MONOTRON DELAY MOD

Introduction: KORG MONOTRON DELAY MOD

About: I'm a 36 year old DIY enthusiast from Vienna Austria with a strong background in mechatronics/automation. My DIY field is mainly video/audio/motion control. If you want to see what i do between posting it ...

I will add more infos asap

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: GATE IN MOD

Step 2: FILTER RESONANCE MOD

Step 3: LFO RE-ROUTE MOD

Be the First to Share

    Recommendations

    • Trash to Treasure Contest

      Trash to Treasure Contest
    • Raspberry Pi Contest 2020

      Raspberry Pi Contest 2020
    • Wearables Contest

      Wearables Contest

    5 Discussions

    0
    NicolásE2
    NicolásE2

    4 years ago

    Hi, thanks for this mod, but how i connect it to a squencer or a tanzbar for example.

    0
    InevitableCraftsLab
    InevitableCraftsLab

    Reply 4 years ago

    if you already have a control voltage the you doesnt need the potis but can use the cv on the points directly. make sure you have mass connected ;)

    0
    InevitableCraftsLab
    InevitableCraftsLab

    Reply 4 years ago

    I will add a drawing to the Instructable with cables instead of pots :)

    0
    InevitableCraftsLab
    InevitableCraftsLab

    Reply 4 years ago

    Hi i meant don't connect the CV (+) alone, also connect the mass (-)