Introduction: KSP V1
Knex Slide Pistol V1
This is a simple slide pistol i made.
It took me about 2 hours to make but I'm always modifying it.
It fires blue rods and the range depends on how many bands you use.
Barrel - step 1
Slide - step 2
Handle - step 3
Trigger - step 4
Ram - step 5
Body - step 6
Bands - step 8
Step 7 is putting it all together
UPDATED MODEL COMING SOON - V2
I decided to take apart V1 to make a new gun, i thought about making a slide that fires larger rods and i came up with this new KSP V2 (2nd picture).
It fires yellow rods.
I'll be posting it soon.
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: The Barrel
Follow the pictures. Some may not be very clear. If you'd like some clearer ones, let me know.
Step 2: The Slide
Follow the pictures and the text on each
Step 3: The Handle
This is a really easy part, just follow the pictures
Step 4: The Trigger
This is the trigger. Follow the pictures and the notes.
This is a version of the trigger i used on my Knex mini-uzi.
Step 5: The Ram
This is the easiest part of the gun. The ram is simple.
Step 6: The Body
The pictures may be difficult to follow. If you need better pictures, please let me know
Step 7: Assembly
Assembly of the gun. The pictures are easy to follow.
Step 8: Bands
Here's where the bands should go
Step 9: You're Done
You should have built the gun by now. And it should work fine. Have fun.
If you had any problems, I'll provide some more pictures.
HOW TO LOAD:
TO LOAD THE GUN, PULL BACK THE SLIDE AND PLACE A BLUE ROD IN THE BARREL.
RELEASE THE SLIDE.
IF LOADED AND BUILT CORRECTLY, THE SLIDE SHOULD ALWAYS RETURN TO NORMAL POSITION. IT SHOULD ALSO BE A LOT EASIER TO PULL BACK THAN BEFORE IT WAS LOADED.