Introduction: Ketya and Veng Huor Machine
Today I share you about my machine because the machine can make the toy lower the weight and so on.Today my machine is about the toy.
Step 1: Planing
First we plan the machine and do not make it to complex or to simple.
Step 2: Cutting
And than we going to cut 4 cams.
Step 3: Gluing
We going to glue the cam( 2 together=1 cam).
Step 4: Draw
After that we going to draw character on our machine(card board).
Step 5: Cut Again
We going to cut the character that we drew(if we want we can color it).
Step 6: Make
Than we can put the cam on the machine in the lever.
Step 7: Glue Glue Glue Glue
Glue the character on machine.
Step 8: Making Hold
When we finish that we must put the handle lever on our machine.
Step 9: Lazy to Cut
After that we cut 1 cam that going to touch the cam that connect to the rounding stick.If it not work we just need to cut the stick rounding cam that is stuck to make it not stuck any more.
Step 10: Connect
Than we need to connect the cam to the character.
Step 11: Paint
After that when we finish the machine we need to put the white side of scrap paper than we need to paint it really beautiful.
Step 12: The End
At the end we have the machine that work really well and has the beautiful painting.