Sup all, this is a modification to a pistoI had made so here's a like to the original:
This is a very powerful rifle, left a stinging sensation when I was shot with it lol.
Only downfall is it takes time to reload.
44 Yellow connectors
35 red connectors
21 White connectors
11 Green connectors
57 Orange connectors
2 Grey end pieces
2 Small blue end pieces
And Small blue spacers
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Body
Make 2 of each and attach
Step 2: Pins
Add the white rods and blue spacers like so
Step 3: Bullet Rail
Make and add the bullet rail like so
Step 4: Trigger System
Make and add the trigger system like so
Step 5: Butt Insides
Make and add these parts to the butt
Step 6: Close It Up
Add the other half and close it up( I suggest doing it in small sections). Amd make sure to add the 8 rubber bands for the bullets, 5 yellow connectors in from the back of the shaft of the gun.
Step 7: Add the Handle
There's 2 Ways to doing it, picture ,1 has finger grooves, which is what I use, or else make 2 of picture 1. Make the rest of the part and add them to the gun.
Step 8: Add the Trigger Rubber Band
Add the trigger rubber band like so.
Step 9: Bullets
Make these as many times as you want, same with next step.
Step 10: Grenade
Make 2 of these