Knex Car

Introduction: Knex Car

This is a simple and fast knex car and is easy to make.

Step 1: Materials

Plus one long grey rod (not in the photo)

Step 2: Back Axel

Take two tires, one grey rod, two red connectors,three brown connectors with a stud, two purple connector, one small gear, two blue spacers and ten grey spacers

Assemble like so on the grey rod:
purple connector- tire- brown connector- three grey spacers- red connector- two blue spacers- blue gear- brown connector- four Grey spacers- red connector- three grey spacers- brown connector- tire purple connector

Step 3: Next Step

Make two frames

Step 4: Connect the Axel to the Frame

Step 5: The Motor

Step 6: Front Axel

Step 7: Final Touches

Add the bendy green rods to the frame and the orange connector

Be the First to Share

    Recommendations

    • Exercise Speed Challenge

      Exercise Speed Challenge
    • Pocket-Sized Speed Challenge

      Pocket-Sized Speed Challenge
    • Audio Challenge 2020

      Audio Challenge 2020

    3 Discussions