Knex Disc Launcher

1,106

4

Introduction: Knex Disc Launcher

About: I've been making stuff with K'nex since I was really young. If you have anything you'd like me to make, let me know and I'll try to make it and then make instructions!

 This gun launches knex wheels 20-30 feet. It should be pretty easy to build. I hope you enjoy!        (Please rate and comment)

Step 1: Building the Slide/Barrel

Just build what you see in the pictures. this is what the wheel/disc slides on. It shouldn't be too hard.

Step 2: Building the Handle and Trigger

 Again, just follow these pictures, this may be a little harder, but you can do it!

Step 3: Putting It All Together

 Almost done!

Step 4: Adding the Rubber Bands

 The rubber bands go here. Look at the pictures! They're help!

Step 5: Loading and Firing

 Now for the fun part!!!!!

Share

    Recommendations

    • Organic Cooking Challenge

      Organic Cooking Challenge
    • Tiny Home Contest

      Tiny Home Contest
    • Metalworking Contest

      Metalworking Contest

    4 Discussions