K'nex Dune Buggy

Introduction: K'nex Dune Buggy

A fast looking dune buggy with awesome flames coming out above the back wheels and with a "K'nex" motor is moderately fast.

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Parts List

You will need:
Rods:
6 Red
2 Yellow
2 White
2 Green
1Blue
Connectors:
13 Purple/Gray
4 Orange
4 Yellow
4 Wheel Holders
2 Green
Spacers:
4 Blue Spacers
Motors:
1 Normal Motor
Wheels With Treads:
2 Big
2Small

Step 2: Base

In the first pic it's showing you where the spacers and wheel holders are placed. In the second it's showing you to push them to the side.

Step 3: Roof

Follow the picture.
P.S. At the back two orange connectors on each side connected by a green rod.

Step 4: Motor

This is how the motor should look before you attach to the roof.

Step 5: Roof Motor Setup

Connect the motor to the roof as in the pic.

Step 6: Finished

YOU ARE DONE! NOW REV IT UP AND TRY IT OUT!

Be the First to Share

    Recommendations

    • Tiny Speed Challenge

      Tiny Speed Challenge
    • Spring Cleaning Challenge

      Spring Cleaning Challenge
    • Trash to Treasure Contest

      Trash to Treasure Contest

    3 Discussions

    0
    MotorMan2
    MotorMan2

    10 years ago on Introduction

    Please leave comments and let me know how I can improve.