Knex Forklift With Back-Wheel Steering

2,262

1

5

About: I've been making stuff with K'nex since I was really young. If you have anything you'd like me to make, let me know and I'll try to make it and then make instructions!

Intro: Knex Forklift With Back-Wheel Steering

This is  the second forklift I have made, the first one could hardly lift anything, this one can lift a lot more, and has steering, so I hope you like it!

Step 1: Making the Lift

 This is where you make the lift (or chain) for the forklift.

Step 2: Making the Front Wheels and Steering Wheel

 This is where you will make the front half of the forklift.

Step 3: Making the Steering Mechanism and Back Wheels

 This might be a little harder, but just look at the pictures and do you best!

Step 4: Making the "Fork"

 This is the last part, hang in there, you're almost done!

Step 5: Putting It All Together

 This is the end, you made it. Yaaaaaaaaaaaaaaay!!!!!!!!!!!

Share

    Recommendations

    • Metalworking Contest

      Metalworking Contest
    • Audio Contest 2018

      Audio Contest 2018
    • Tiny Home Contest

      Tiny Home Contest

    5 Discussions

    0
    None
    JazzBoy

    7 years ago on Introduction

    that does not look like a fork lift (more like a dork lift)

    0
    None
    lemonie

    8 years ago on Introduction

    You've got the fork-lift about right there, esp. the rear-wheel steering. No they aren't pretty.

    L

    0
    None
    brammeke11

    8 years ago on Introduction

    I lite the mech and that you use the grey pieces chain instead of rope.
    But its a bit skeleton... ish