Knex L96

OK: LOOK, I HAVENT FINESHED THIS INSTRUCTABLE. IF YOU WANT ME TO FINISH IT, LET ME KNOW IF ITS WORTH MY TIME. RATE OR COMMENT PLEASE! I have also made the handle better



This is an INSANE rifle that will dominate the field! I did not include any specs Ill let you figure out the insane amount of power this gun has!! Also has a TRUE BOLT ACTION!!


Power:9/10
accuracy:8/10
Sturdiness:8/10
ease of use: 6/10

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Parts Count

connectors
Yellow:90
Blue 3d:
White:18
Grey two slot:16
Orange:53
red:2
grey one slot:6

rods
White:105
Green:120
Blue:40
red:2
Grey:2
yellow:1

Step 2:

1. make this
2. make this
3. make 2 of theese
4. add theese on to the piece from step 3
5. connect them
6. add step 1
7. add step 2
8. all done

Step 3: Stock

1. rear stock
2. make 3 of theese
3. layer those 3 like this
4. side veiw
5. make theese
6. make this

front stock

7. make theese
8. make this
9. put 7 and 8 together
10. another veiw of 9
11. put rods in like this
12. connect the rear and front stocks
13. connect step 6
14. the complete stock

Step 4: Firing Mec and Trigger

1. make theese
2. connect that other piece to it
3. make this
4. connect it
5. make the ram
6. ur done wit this part

Step 5: The Body

lower body:

1. what ur going to make
2. make theese
3. just step 2 but u need to pu rods on one piece.
4. just add that where i said
5. sandwich then together
6. another veiw of step 5

upper body:

7. make this
8. another veiw that is the bolt action there.
9. fold it and it will look like this
10. make this 4 later
11. put step 9 right the on the lower body and install the firing mec. it is better to put bands on b4 u do this so you don take your gun apart to add bands.
12. trigger connection veiw

Step 6: The Barrel

Be the First to Share

    Recommendations

    • CNC Contest

      CNC Contest
    • Teacher Contest

      Teacher Contest
    • Maps Challenge

      Maps Challenge

    3 Discussions

    0
    None
    knexsniper1

    10 years ago on Introduction

    i see that i have some competition! lol, jk :P nicely done! check out my sniper! its an L96A1 too! -ksp

    0
    None
    DJ Radio

    10 years ago on Introduction

    I wonder why everyone is posting unfinished ibles, they have all the time in the world. Anyways, it does not dominate the battlefield- that is reserved for guns like knexsayer or BR18. Also it does not have true bolt action, its just a normal pull back firing pin. Also it does not look like an L96. However, I do not think less of a gun because of false claims, I am pointing out that you used the terminology incorrectly As for the gun itself, It looks sloppy in a few places, could do with a foregrip, and less space between each section of the fake barrel. You know what, do away with half of that barrel.