Knex Magazine




This is my Knex magazine, it is is spring loaded it holds 7 green rods and is no more than 5 or 10cm tall.

Step 1: Making the Bass

this is the bass of the magazine. just copy what is on the pictures.i apologise about the second picture  but all you do is attach 2 yellow pieces on either side of the orange pieces.

Step 2:

sorry about the picture again but you should be able to see everything I've done.   

Step 3:

just make the piece pictured and attach it like it is in the second picture.

Step 4:

again sorry about the pictures but just make the firing pin in picture 1 (you can use different length of rods) and attach it as shown in picture 2. and there you have your magazine.



    • Build a Tool Contest

      Build a Tool Contest
    • Epilog X Contest

      Epilog X Contest
    • Organization Contest

      Organization Contest

    7 Discussions


    Reply 3 years ago

    hey you from six years ago. You meant theif.

    DJ Radio

    9 years ago on Introduction

    This has been done countless times before, and the others made one that shot.