Introduction: RBG's of War-The Bandit (Knex)
This is the Bandit, the first of my brand new series of RBG's.
-Enough power to make your older sister yelp
-10 ft.+ in total range
-Looks similiar to a sniper (Judge for yourself)
-One shot, but i take this as pro personally, because snipers can take a bit to reload, and so does this
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Piece Count
Each amount is above or to the left of the pieces shown.
Step 2: Trigger/Mechanism
1-Pieces needed. Each amount is above or to the left of the pieces shown.
6-Attach, set aside for later.
Step 3: Rear
1-Pieces needed. All amounts are above each of the pieces shown.
7-Attach, set aside for later.
Step 4: Barrel
1-Pieces needed. No amounts are listed, as these are the only pieces remaining.
5-Repeat steps 3-4.
11-Attach, set aside for later.
Step 5: Putting It Together
1-Parts so far.
5-Place RB as shown.
6-Place loom band on green dot, attach it to red dot.
Hold left hand on yellow dot, place blue dot on right palm, and use right middle finger to pull trigger.
1 Person Made This Project!
- TheKnexChicken made it!