K'nex Ratcheting Car

Introduction: K'nex Ratcheting Car

K"nex needed for this project.

  • 4 medium wheels
  • 2 small gears
  • 1 medium gear
  • 1 large gear
  • 1 black wheel (for steering wheel)
  • 4 red headtops (for lights)
  • 7 white connectors
  • 8 yellow connectors
  • 10 green connectors
  • 6 red connectors
  • 3 light gray connectors (2 connecting spots)
  • 13 gray connectors (end connectors)
  • 21 small green rods
  • 26 white rods
  • 11 blue rods
  • 6 yellow rods
  • 1 red rod
  • 1 long gray rod
  • 8 tan clip connectors
  • 8 blue clip connectors
  • 47 blue spacers
  • 7 gray spacers
  • 4 metallic blue connectors (3d)

Step 1: K'nex Car Cab

Step 2: Front Wheels

Front wheels on a long gray rod.

Step 3: Gears

Gears on yellow rods

Step 4: Back Wheels

Back wheels on a red rod.

Step 5: Ratchet

Add the ratchet and make sure the short rod aligns with the gear as the handle rotates around the gear to turn the gear.

K'NEX Contest

Participated in the
K'NEX Contest

Be the First to Share

    Recommendations

    • Exercise Speed Challenge

      Exercise Speed Challenge
    • Pocket-Sized Speed Challenge

      Pocket-Sized Speed Challenge
    • Audio Challenge 2020

      Audio Challenge 2020

    4 Discussions

    0
    GWorks
    GWorks

    5 years ago on Introduction

    Looks good for a first instructable :)
    Welcome ^^