I made iac's heavy cannon then thought i should make a smaller version if people dont have enough peices so i came up with this!!!
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Peice Count (optional)
These are the peices you will need for the bow and the bullet: Connectors: Yellow-45 Orange-17 Blue-16 Green-6 Purple-16 White-4 Red-10 Dark grey-6 Light grey-6 Rods: Yellow-3 White-49 Blue-12 Green-98 Others: Blue spacers-4 Silver spacers-12 Medium wheels-2 Elastic bands(medium size)-2 If you have these! Start making!!!
Step 2: Handle
This is a very basic handle. This is not the trigger!
Step 3: Lower Barrell
This is the step that is not to hard.
Step 4: Upper Barrell
This is the same as the lower barrell
Step 5: Bow
This is the main body structure and uses very few peices
Step 6: The Wheels
This step is complicated. Hopefully there is enough photos for you to know where to put everything.
Step 7: Attaching Upper and Lower Barrell
This stepbis pretty step forward
Step 8: Securing the Barrells
Attach the orange bit here so the barrell fits the bullet
Step 9: Attaching the Elastics
This uses two elastic bands joint together. Put around the white rods around the wheels through the middle of the upper and lower barrells, around the other wheel and round the opposite white rod.
Step 10: Stand
These are not needed
Step 11: Loading and Firing
The pictures are self explanitry
Step 12: Your Done!!!!!!!
Well done youre finished! Now go have fun but remember dont shoot towards anybody! Thanks!!!