Introduction: Knex Rifle PS49
This is my first time at trying to make my own Rifle so no bad comments please and if you have any mods to add to it or improvments to make to it then please leave me a comment about it and sorry the pics arn't good, and it is also a true triggered Rifle if you can't understand anything then comment it to me as i don't want to take my it apart and i don't have enough pieces to build another one. I have made the PS49 up myself it was originaly ment to be a sniper rifle but i took the scope off and i think it looks better without one
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: The Handle
This is the handle of the sniper, i thought it looked quite smart and it is comfortable enough for me
Step 2: The Stock
This is the stock of the gun or as some people call it, the butt of the gun
Step 3: The Front
This is the very front of the sniper
i hope you can work from the image because i can't be bothered to take any more. I hope the notes help
Step 4: The Barrel
This is the barrel of the gun https://www.instructables.com/id/Glock_38/
i did the barrel same as this glock but just made it longer
for the bottom of the barrel you need 9 orange connectors the last image will show you how to connect them to the barrel, but first just connect 7 with a green rod
and connect the 2 others with a green rod
Step 5: The Trigger
This trigger is also from this glock https://www.instructables.com/id/Glock_38/
Step 6: Rubber Bands and Firing Pin
This is where all the rubber bands go
Step 7: Connecting Together
Now you can connect it all together
the stock you should have already connected to the handle.
Step 8: Done
Now you should just about be done, if you have any problems then private message me or leave a comment.
HEALTH AND SAFETY
I am not held responsible for what damage this gun causes.
do not shoot people or animals with this gun