LDR Tutorial Linkit One

This tutorial contains information for working of LDR. You can use LDR by connecting it to Linkit One's +5 volt and A0 or A1 pins then read the values of them and then use them in your projects.

Step 1:

> Linkit One( and Linkit One SDK installed in your laptop or computer )

> Linkit One's USB Cable

> LDR

Step 2:

Connect LDR's one terminal to +5V of Linkit one and another terminal to A0. Upload this code .

Step 3:

Now open serial monitor to see the value. Now you can use this value as desired by you.

Share

    Recommendations

    • Trash to Treasure

      Trash to Treasure
    • Tape Contest

      Tape Contest
    • Arduino Contest 2019

      Arduino Contest 2019

    Discussions

    0
    None
    seamster

    3 years ago

    Thanks for sharing this. Welcome to instructables! :)