Introduction: LED Night Light

Step 1: Plug the 9v Battery Into It's Holder.

Step 2: Plug the Battery Leads Into the Breadboard.

Step 3: Plug the LED Into the Breadboard.

Make sure that the longer leg on the LED is on the left side of the breadboard.

Step 4: Connect the Resistor to the Shorter Leg of the LED.

The resistor color code is "brown, black, red".

Step 5: Add the Switch.

Connect one wire from the switch to the longer leg of the LED and connect the other wire from the switch to the resistor.

Step 6: Connect the First Jumper Wire.

Step 7: Connect the Second Jumper Wire.

Step 8: Now Your Done! :)