Introduction: LED Light
Ever got stuck in the dark and you cant see well now you can with this easy to make LED light.
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Materials
- one LED w/ a on/off button
-duct tape and some thing to cut it with
- 4 small watch batteries
-one cape i used a cape from a smencile case but a sharpie cap will work too
Step 2: Tape the Batteries
All u need to do is tape the batteries together with a piece of tape ( see picture 1)
Step 3: Tape It All Togather
Tape the Led to the batteries. ( it should now look like picture 1)
Shove the LED/Batteries into the cap now you are done just push the top and the light should turn on.