Introduction: LEGO Rush Coil
This tutorial shows you how to build a pretty decent Rush from Mega Man that can be built from Lego bricks you have around the house. I've entered this for the Fandom contest so please vote!
Check out this tutorial by Brick 101 on how to build that Mega Man.
Step 1: The Parts:
Here are the parts you will need - feel free to substitute or change parts:
2x 1x1 round tiles with printed eyes. You can use white studs if necessary.
5x translucent red (or normal red) studs
4x translucent orange (or normal orange) studs
4x tan/peach studs
2x headlight bricks - red
2x 2x2 round bricks - red
2x2 round brick or plate - depending on what you have (or want) - red
2x2 round tile - red
2x 1x4 red plates
1x2 tan/peach tile
2x 1x2 tan/peach plates
1x2 tan/peach grill
5 stud long (or shorter) axle
Technic bushing (you can use a 1/2 bushing)
2x 1x1 red plates with horizontal clips
4x 1x1 red plates with vertical clips
1x2 red brick with technic cross hole
2x 1x2 red plates with horizontal clips
3 stud long white bar. You can really use any colour here, but the best ones are white, red, tan or brown.
3x 1x2 jumper plates in red (you can use dark red, as I have done)
1x2 tan/peach jumper plate
2x 1x2 red plates
1x1 tan/peach brick with studs on two sides
1x1 tan/peach brick with a stud on one side
1x1 brick with studs on all sides - also known as the Travis brick - this can be any colour
1x2 plate with horizontal clip
Step 2: Building the Body
Just follow the pictures, it is pretty self-explanatory.
Step 3: Constructing the Legs
The front and hind legs.
Step 4: Crafting the Head
You're nearly finished!
Step 5: Final Touches
Just add the head and spring, and you're done!