Introduction: Laci Világítós Cucca
I have some left boards, I use this for this project This is a small stand for my colleague. Easy but meticulous work.
(translate.google, sorry when not good the english :D)
Step 1: Cut and Use the Router
I cut the boards to small pieces and use my router for trimming
In the next step I use the drill
And the easy joining, not perfect but quick :)
Step 4: The Last Step, Glass and Led
In the next step I burn the wood and use oil.
bouhgt plexi and cut it.
I would sand the plexi for the project. When I can this make I write.
This is an entry in the
Creative Misuse Contest