Introduction: Laser Hologram
Hey guys, in this Instructable, I will show you how to light up your Christmas eve as well as your house with futuristic Laser Holograms.
NOTE: This project includes the use of a laser. Special care must be taken while handling with the laser. Don't look at the laser directly.
The ingredients are as follows:
1. A mini toy laser light
2. A paint bottle cap or bottle cap
3. A used paint bottle ( whose diameter is slightly smaller than that of the cap)
4. A marker pen
5. A paper cutter
6. A glue gun
Now, proceed to the next step.
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Preparing the Gadget
In this step, take the bottle cap and with the marker, make a circle on the bottle cap (on the upper flat surface) according to the size of the laser light's head. Then take the paper cutter and cut the shape. Make it a bit bigger in size to fit the laser perfectly.
Step 2: Still Preparing the Gadget
Now, take the laser light and fit it into the whole you made earlier from the upper flat part of the bottle. Then, take a glue gun, heat it, and then glue the laser in place so that it never moves.
Step 3: Enjoy Your Gadget
Now, take the paint bottle and keep it on the inner part of the bottle cap. Then switch on the button of the laser and keep moving your paint bottle to see various designs being projected on your wall or table. There's a video file below, you can download it and see how our gadget glows!
Keep moving your gadget and see it glow!
Merry Christmas and a very Happy New Year.
This is an entry in the
Make it Glow Contest