Leather Card Case




About: We are a professional leather pattern design and tool development studio, we offer high quality pdf, acrylic patterns, and high quality leather tools. We have 2 online stores: www.leathercraftpattern.com www...

You can have this acrylic pattern from here:


The finished size is: 4.8" x 3.1" x 1.1" (12.2cm x 8cm x 2.7cm).


Leather: 2.0mm (5oz) leather, size 26cm x 13cm. 1.0mm (2.5oz) leather, size 43cm x 15cm.

Hardware: 633 snap x1.

Tools: If you are a new leather player, try to considerate to have tool kit here: http://www.leathercraftpattern.com/leather-tools-leathercraft-tools/leather-tool-kit/leathercraft-tools-leather-craft-patterns-leather-art-leather-carving-tool

Step 1: Cut All Leather Pieces From Acrylic Pattern, Punch Stitching Holes Use Chisel, and Then Install 633 Snap (stud and Eyelet) on Main Body.

Step 2: Install Cap and Socket on Strengthen Leather.

Step 3: Sew the Card Slots, After Sewing on Stitching Line, Fold and Hammer It to Keep the Shape.

Step 4: Sew It On. Notice That, the Top Stitching Line Is for Decoration.

Step 5: Glue and Sew Strenghten Leather On, the Card Case Is Finished.



    • Fandom Contest

      Fandom Contest
    • IoT Challenge

      IoT Challenge
    • Gardening Contest

      Gardening Contest

    2 Discussions