Handmade Leather Craft + LED Lights !!!
It's easy to make.
Step 1: Materials
1L steel cans, leather 345mm * 130mm, Led Strip Module, 12V DC power supply , sewing thread
Step 2: Hand Sewing & Drilling
The stitching on the leather.
Drill a hole in the bottom.
Use the rivet & label.
Foil stamping by Kingsley Machine ^^
Step 3: Electrical Wiring & Attach
Connect the wires and attach to the inside of the steel can.
Step 4: Electrical Testing & Completion
It is very bright.