Introduction: Led Lantern

By

Requirments

Hardware:
1x Arduino uno

1x 5v Rgb analog led strip 1m

1x Led strip connector

1x medium/ large breadboard

3x Trip 31C Transistors

12x wire

3x current wire's

1x 12v power supply

1x Usb cabble A to B

Software:

arduino IDE

This will let you upload the code on the arduino.

Step 1: Blueprint

This is what we are going to do.

Step 2: The Wires

take 4 wires and put one in power outlet 3,5,6 of your arduino, put the last wire in the 5v of the arduino.

Step 3: Breadboard Setup

Step 4: Connecting the Wires

Step 5: Final Look

The code upload code to the arduino you must have downloaded arduino IDE, one's you have done that you type in this code and your arduino should light up.

You can write bluepin or greenpin to get those collors.

#define redPin 5

#define bluePin 3

#define greenPin 6

void setup(){

pinMode(greenPin, OUTPUT);

pinMode(bluePin, OUTPUT);

pinMode(redPin, OUTPUT);

}

void loop(){

int r, g, b;

analogWrite(redPin,500);

}