This Instructible will show you how to make an awesome lego ATV
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Parts You Need
Parts (top left to bottom right) four large tires, four large wheels, two axle/low plates,two grill pieces,one two-by-two plate, one handlebar, one two-by-one with a single stud on top, a two-by-one with an upwards peg, two two-by-two wheel cover pieces, one translucent two-by-one plate, a two-by-one plate, a two-by-two circular plate, a two-by-six plate, a two-by-one plate with a two-by-two side-plate, a one-by-one upwards clamp, and lastly a two-by-four plate
Step 2: Put the Wheels on the Axels
Step 3: Put the Tires on the Wheels
Step 4: Put the 2 X 2 Plate on One of the Axel Pieces
Step 5: Put the 1 X 1 Upwards Peg Piece on One Side of the 2 X 2
Step 6: Put the 1 X 1 Plate by the Other 1 X 1 With the Upwards Peg
Step 7: Put the 2 X 6 Over the Wheel Axel
Step 8: Put the Other Wheels on the Underside of the 2 X 6
Step 9: Put the 2 X 2 Wheel Cover Over the Back Wheels
Step 10: Put the 2 X 4 on the Space Left on the 2 X 6
Step 11: Put the Circular 2 X 2 on the Front
Step 12: Put the Other Wheel Cover Over the Circular 2 X 2
Step 13: Put the 2 X 1 With the 2 X 2 Side-plate on the Front End
Step 14: Put One of the Grill Pieces on the Bottom of the Side-plate
Step 15: Place the 2 X 1 Translucent Piece Above the Grill on the Side-plate
Step 16: Put the 1 X 2 With the Single Stud Behind the 2 X 1 Part of the Side-plate
Step 17: Put the 1 X 1 Upwards Clamp on the Single Stud
Step 18: Place the Handlebars on the Clamp
Step 19: Put the Last Grill on the Very Back of the ATV
Congratulations! You have just built a minifigure friendly ATV, enjoy!