This is layer four. The long white ones are 16 by 1 bricks I got from a pick a brick.
This project was built on a 16 by 16 plate
Step 1: Dividers
This picture was taken at layer four. I thought that it would need to have some support under the 16 by 1 bricks it turned out that I did not need it
Step 2: Headphone Wrap
The headphone wrap was built into layer six. I have taken a picture of the pieces I used for this.
Step 3: More Height
I continued adding more layers.
Step 4: Key Hook
I used two technic pieces to make the key hook. I put one more layer on it after the key hook and added another layer around one of the front compartments
Step 5: Keeping the Tablet Up
I used one of these on each side on the end of the 1 by 16 bricks to keep the tablet from slipping off
Step 6: Enjoy Your Work
This is my finished project it had no problem holding up my iPad mini or my moms Kindle Fire hd 7 inch
I did not give much direction on how to build this because it's very simple to build and I had to take it apart before I got to write detailed directions.