Introduction: Lego Pendant
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Materials:
- 1 by 1 rounded platform pieces. (different colors) x4
- 2 by 2 rounded platform piece. x1
- 1 by 1 platform piece with loop attached to one side. x1
Visit Lego Pick A Brick for parts.
Step 2: Making the Design
In this step we will start off with the 2 by 2 rounded platform, then add the 1 by 1 rounded platforms.
Step 3: Attaching the Loop Piece
In this step we will add the 1 by 1 platform piece with the hoop attached to one side and the string.
Here is what you do: Flip over your design and add the 1 by 1 platform piece with loop attached to one end like shown in the picture. Then put the string through it.
Step 4: Making the Knot
In this step you will learn how to make a simple knot. (To tie your pendant string.)
Step 5: Finish
Voila! you have just learned how to make a Lego Pendant. Please leave a comment and P.M. me if you have any problems!