Lego Space Invader Belt




This is a idea that I got when i saw a belt buckle that was just Legos stuck together in a square formation. But I wanted something a little more creative so I made my own and though I would share it with you

thing your going to need
1. legos
2. drill
3. cloth belt
4. super glue
5. nail
6. candle
7. thread and needle
8. screw and a loop or a coat hanger

Step 1: Brick Formation

take your legos, what ever color you want and make a space invader of any kind, i picked this one because i thought it would work as a belt the best

Step 2: Now Glue the Bricks

next take a part your invader (but be careful to remember the way it was) and put some super glue on each brick and stick them together in the right order

Step 3: Glue in Order and Wait

after you have glued the bricks together wait and check to see if it holds up good enough if so drill 3 holes in it, two for the loop and one for the screw

Step 4: Enter the Brick

after you have drilled the holes put a little glue on the loop and screw and fit them in their places

Step 5: Attaching Your Belt

the belt i chose was cloth and tough, and attaching it to the loop was easy. the kinda belt to use should be easy to cut but not to easy. attach it by sewing it around the loop

Step 6: Burn Holes

now your guna need holes for your belt screw to fit in to, i made these holes with a hot nail. Why a hot nail? Because it leaves a clean hole and its much easer than using a hole punch

Step 7: Step 7 Try It On

now try it on and see if you need to burn more holes, if not your done enjoy



    • DIY Summer Camp Contest

      DIY Summer Camp Contest
    • Beauty Tips Contest

      Beauty Tips Contest
    • Barbecue Challenge

      Barbecue Challenge

    31 Discussions


    8 years ago on Introduction

    Has any one else noticed that all the photos where hes wearing the belt, its orange, but for all the others its red?


    I just made one, and it is AWESOME!!! :D thanks alot for the instructable


    9 years ago on Step 7

    I am soooo trying this, now... I need to find a belt to sacrifice o.o I think ill go buy a cheap one, like this one, but black, u know any places?

    1 reply

    10 years ago on Introduction

    Is There Any Way You Can Send Me A Pic Of That Drawing..... I Have Poor Lego Skills lmao

    1 reply

    Reply 10 years ago on Introduction

    oh my god you have to make ethier blinky or pinky. i want to make one of the invader(love that game)and the ghosts(lol you spelled goats. mah ah ah ah ah.).


    Reply 10 years ago on Introduction

    i just finished the space invader. i didn't have enough 2 wides so i used a few 1 wides.i took it apart 7 times to move pieces to make it work. it looks exactaly like yours. and i had an idea. a lego panda head buckle. pandas rock!