Letter E in PVC

Fun project that takes little time. 

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Gather Materials

You will need:
4 PVC pipes 3inches long at 1/2 inch thick
1 PVC pipe 1inch long at 1/2 inch thick
2 90degree connectors
1 T-Shape connector
PVC cutter

Step 2: Cutting

Cut the PVC pole so that you have 4 pipes at 3 inches and 1 pipe at 2 inches

Step 3: Assemble

Put all of the 3 inch pipes in the open ends of the 90 degree connectors. 

Connect two of the 3 inch pipes with the T-Shape connector leaving the middle part of the T-Shape facing the middle. It should look like an incomplete square with and open piece in the middle. 

In the open end of the T-Shape connector put the two inch pipe

Be the First to Share


    • CNC Contest

      CNC Contest
    • Make it Move

      Make it Move
    • Teacher Contest

      Teacher Contest



    5 years ago

    For a 5 yr old this is a good first time instructable. Good work!