Low Pass Filter for Subwoofer With 4558D IC

In this project I will show you how you can make a Low Pass Filter with 4558D IC for Subwoofer.

Let's get started!

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Watch the Video!

This video gives you all the information you need to build your own Low Pass Filter.

Step 2: Order Your Components

i ordered all the components from lcsc.com

|| Components list ||

NJM4558D - https://goo.gl/rZgTB3

2.54mm DIP IC SOCKET - https://goo.gl/eZErkD

MC7915BTG - https://goo.gl/qoErYW

L7815CV - https://goo.gl/GCxztf

100uF(101) ±20% 25V - https://goo.gl/U5koR3

2.2uF 50V - https://goo.gl/MN4dbW

220nF(224) ±5% 250V - https://goo.gl/u4ZG2H

100nF(104) ±5% 250V - https://goo.gl/SUR7Fw

560Ω (5600) ±1% - https://goo.gl/e24EdE

22KΩ (2202) ±1% - https://goo.gl/AmfDgV

33KΩ (3302) ±1% - https://goo.gl/ZSLjMz

2.2KΩ (2201) ±1% - https://goo.gl/NJQUE3

220Ω (2200) ±1% - https://goo.gl/HT4Mfy

10KΩ (1002) ±1% - https://goo.gl/t9hZhd

Step 3: Let's Build PCB

Here you can see how you can build your own PCB

PCB Layout - https://goo.gl/WqAujk

Step 4: Let's Complete It

you have to watch the video for full build

Step 5: Connections

Step 6: Success

We did it! we just built our own low pass filter for subwoofer

Be the First to Share

    Recommendations

    • CNC Contest

      CNC Contest
    • Make it Move

      Make it Move
    • Teacher Contest

      Teacher Contest

    8 Discussions

    0
    None
    Rizuly

    Question 4 months ago

    Sir please share layout for 12v DC not CT

    0
    None
    HayyanyasirWaseemS26

    Answer 5 months ago

    Dear Waseem

    Please watch carefully center pin of regulator 7815 is not connected with ground. Connect this pin with ground and your circuit will be turn on and works. Plz replay if your problem solved.

    Thanks

    0
    None
    kh025104

    Question 5 months ago on Step 3

    sir 4558 low pass filter pcb ples

    0
    None
    JJO10

    Question 6 months ago

    Can get your Diagram and Lay out?

    0
    None
    AubreyL8

    9 months ago

    I had tried one circuit we hich worked very well; the Bass response was awesome. I retried it again but just didn't work. Perhaps the age factor; 77 plus, come silly error. Will post image shortly!!

    0
    None
    BambhniyaN

    11 months ago

    Contact number