MST-756 Easy Reload Mod

About: I am an engineering graduate who is constantly tinkering, making, and building. I have always enjoyed disassembling old electronics and re-purposing them. I enjoy anything mechanical, electrical, chemical, o...

if you have seen my gun the MST-756 i noted that it is hard to reload. this will make it much easier to reload in a shorter amount of time. look at the pictures

you will need
16 ball connectors
16 socket connectors
16 hinges
64 black rods

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Mod the Guns

you need to replace four of the blue rods with ball-and-socket joints and hinges

1. before mod
2. after mod

do this with all the guns

Step 2: How to Use It

now it is easier to load the guns
1. how to start
2. unclip the green connectors
3. fold the gun down
4. load it
5. fold it back up and reclip it

you can fold all of them down at one time and load them lake that too (4 & 5)

Step 3: Finished

You don't need to put the green connectors on at all in the front, but i find it help with stability. Thanks for looking and i hope this helps.

Be the First to Share

    Recommendations

    • CNC Contest

      CNC Contest
    • Teacher Contest

      Teacher Contest
    • Maps Challenge

      Maps Challenge

    14 Discussions

    0
    None
    Wicky

    9 years ago on Introduction

    Heh, didn't realize this was a gun untill I read a bit more, could be a very good spider ^^

    2 replies
    0
    None
    KnexFreek

    9 years ago on Introduction

     LOL 64 black rods!! LOL 
    U izz funnee :)

    also nice mod! 5*